CCENT CCNA CCNA routing and switching Certificate Cisco

You have HSRP configured on your network with router RouteParis1 as the active default gateway and router RouteMadrid2 as the standby default gateway.​What is the best way to configure PC, Reception, to ensure that it is using a redundant default gateway?

You have HSRP configured on your network with router RouteParis1 as the active default gateway and router RouteMadrid2 as the standby default gateway.

What is the best way to configure PC, Reception, to ensure that it is using a redundant default gateway?

  • 1- Ensure that the same priority is assigned to RouteParis1 and RouteMadrid2
  • 2- Create a default route to RouteMadrid2, in case RouteParis1 goes down.
  • 3- Ensure that it is assigned the virtual default gateway.
  • 4- Ensure that it is configured with two default gateways, IP of RouteParis1 and RouteMadrid2




  • The correct answer is:

  • 3- Ensure that it is assigned the virtual default gateway. 

To configuring the Router:
standby [group-number] ip [ip-address [secondary]]

RouteParis1(config-subif) standby 13 ip 10.1.1.73

Example the ip configured with standby command, that will be used as the default gateway, you should configure on the end stations.
.

Practice Cisco ICND2 v3.0(200-105) exam or IT skills
Practice Cisco ICND2 v3.0(200-105)

Leave a Reply